Millipore Sigma Vibrant Logo
Attention: We have moved. EMD Millipore products are no longer available for purchase on emdmillipore.com.Learn More

CCGL71TP1 Charged Durapore® Cartridge 10 in. 0.22 µm Code 7

MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
View Products on Sigmaaldrich.com
CCGL71TP1
1  Double Easy-Open bag
Purchase on Sigma-Aldrich

Overview

Replacement Information
Description
Catalogue NumberCCGL71TP1
Trade Name
  • Durapore®
DescriptionCharged Durapore® Cartridge 10 in. 0.22 µm Code 7
References
Product Information
HS Code8421 29 90
Device ConfigurationCartridge
Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C
Cartridge CodeCode 7 (2-226) O-rings w/locking-tabs
Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Quality LevelMQ400
Applications
Biological Information
Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
MediaCharged Durapore®
SterilityOther
Sterilization10 SIP cycles of 30 min @ 135 °C
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
WettabilityHydrophilic
Physicochemical Information
Pore Size0.22 µm
Air Diffusion at 23 °C≤10 mL/min @ 2.1 bar (30 psig) in water
Bubble Point at 23 °C≥3100 mbar (45 psig) air with water
Flow Rate45 L/min @ 1.2 bar ΔP
Gravimetric ExtractablesThe extractables level was equal to or less than 20 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Dimensions
Cartridge Nominal Length10 in. (25 cm)
Diameter6.9 cm (2.7 in.)
Filtration Area0.69 m²
Device Size10 in.
Materials Information
Chemistry
  • Polyvinylidene Fluoride (PVDF)
Device Material
  • Polypropylene
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Toxicological Information
Safety Information according to GHS
Safety Information
Product Usage Statements
Storage and Shipping Information
Packaging Information
Material Size1
Material PackageDouble Easy-Open bag
Transport Information
Supplemental Information
Specifications
Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL
Global Trade Item Number
Catalog Number GTIN
CCGL71TP1 04053252310911

Documentation

Charged Durapore® Cartridge 10 in. 0.22 µm Code 7 SDS

Title

Safety Data Sheet (SDS) 

Certificates of Quality

Title
Cartridge Durapore Cartridge - C9HA52239
Charge Durapore Cartridge C4DB71437
Charge Durapore Cartridge C7PA87769
Charged Duapore Cartridge C9NA06875
Charged Durapore Cartridge C7CA88797
Charged Durapore Cartridge C7NA78982
Charged Durapore Cartridge C8PA49967
Charged Durapore Cartridge C0CB42326
Charged Durapore Cartridge C0JB87755
Charged Durapore Cartridge C0MB19904
Show more

Technical Info

Title
Bubble Point Test Method Using Durapore® 0.22 µm Hydrophilic Membrane with 60/40 IPA
Integrity Test Troubleshooting - Beyond Rewet and Retest

Data Sheet

Title
Durapore® Family Guide

User Guides

Title
Hydrophilic Durapore® Cartridges and Capsules User Guide
Wetting Instructions for Filter Units with Durapore Membrane