Millipore Sigma Vibrant Logo

AP4004700 Glass Fiber Filter without binder

0.7 µm pore size, hydrophilic glass fiber, 47 mm diameter

View Products on Sigmaaldrich.com
AP4004700
100 pack, AP40, 47 mm  
Retrieving price...
Price could not be retrieved
Minimum Quantity is a multiple of
Maximum Quantity is
Upon Order Completion More Information
You Saved ()
 
—
Request Pricing
—
Limited Availability Limited Availability
Stocked 
Discontinued
Limited Quantities Available
Available
    Remaining : Will advise
      Remaining : Will advise
      Will advise
      Contact Customer Service
      Contact Customer Service

       

      Contact Customer Service

      Overview

      Replacement Information
      Description
      Catalogue NumberAP4004700
      DescriptionGlass Fiber Filter without binder
      Background InformationOverview
      Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our Glass Fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar).

      Glass Fiber Filters with Binder Resin:
      Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

      Type AP15
      •Lowest dirt-holding capacity
      •Recommended prefilter for 0.2 to 0.6 µm filters

      Type AP20
      •Lower retention, higher dirt-holding capacity than AP15 filters
      •Recommended prefilter for 0.8 to 8.0 µm filters
      •Use upstream to protect type AP15 filters

      Type AP25
      •Added thickness yields same retention and greater dirt-holding capacity as AP20
      •Recommended prefilter for 0.9 to 8 µm filters, especially for proteinaceous and heavily contaminated liquids
      •Use upstream to protect type AP15 filters

      Glass Fiber Filters without Binder Resin:
      The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

      Type APFA
      •Retains fine particles with good efficiency, even at high flow rates
      •Recommended for monitoring wastewater and collecting suspended particles in gases (e.g., fumes from chimneys)
      •Use in biochemical applications (e.g., collection of cells and filtration of protein or nucleic acid precipitates)

      Type APFB
      •Higher mechanical strength when wet and greater loading capacity than type APFA filters
      •Use for liquid clarification, quantification of solids in suspensions of fine particles, and scintillation counting

      Type APFC
      •Greater retention, especially for fine particulate and microorganism removal than type APFA filters
      •Use for determining total suspended solids in drinking water
      •Use for filtering proteins or nucleic acid TCA precipitates and for collecting cells and microorganisms

      Type APFD
      •Thick filter with high flow and low retention
      •Use for clarifying suspensions containing particulates greater than 1.0 µm

      Type APFF
      •Use for filtering extremely fine precipitates such as protein, nucleic acids, or serum precipitates
      •Recommended for USEPA method 1311 for TCLP analysis

      Type AP40
      •Recommended for Standard Methods Total Suspended Solids 2540D
      •Recommended for USEPA method 1311 for TCLP analysis
      •Maintains structural integrity without weight loss when ignited to 550 °C (1022 °F) after sample filtration
      •Recommended for determining volatile suspended matter in wastewater and industrial effluents
      References
      Product Information
      HS Code7019 80 00
      Filter CodeAP40
      Filter ColorWhite
      Maximum Operating Temperature550 °C
      Filter TypeDepth filter
      Applications
      Application0.7 µm pore size, hydrophilic glass fiber, 47 mm diameter
      Biological Information
      WettabilityHydrophilic
      Physicochemical Information
      Pore Size0.7 µm
      Water Flow Rate
      • >300 (mL/min x cm²) at 27 in Hg
      Dimensions
      Filter SurfacePlain
      Thickness475 µm
      Filter Diameter (⌀)47 mm
      Materials Information
      Chemistry
      • Glass Fiber
      Toxicological Information
      Safety Information according to GHS
      Safety Information
      Product Usage Statements
      Storage and Shipping Information
      Packaging Information
      Material Size100 pack, AP40, 47 mm
      Transport Information
      Supplemental Information
      Specifications
      Global Trade Item Number
      Catalog Number GTIN
      AP4004700 04053252514210

      Documentation